Perfect Application with Details

Betektect Thermal Insulation Board is adhered to the surface from bottom to top as baffle coating and with frame method using Betektect Thermal Insulation Adhesives. Bottom coat should be supported with subbasement profile and it should be checked whether boards fitted are in accordance with their gauge.

During doorjamb application, corner points should be protected properly with Betektect Corner Profiles.

In addition to Betektect  Thermal Insulation Adhesives, Betektect  Wall Dowels to be selected depending on surface type and plate thickness should be used in order to assure the system for wind loads.

After plaster coat gets dry, Betektect  Coating Primer should be applied first and then the application should be completed with Betektect Thermal Insulation System Paints on Betektect  Silicone Coating or Betektect Mineral Coating.

Betektect Thermal Insulation Plasters should be applied on insulation boards so that Betektect Reinforcement Meshes will be in such a position that they will be close to the surface. Reinforcement Meshes should be placed so that they overlap 10 cm at joints.

For top coat application, Betektect Elastic Brick, which offers different decorative solutions for your surfaces, may be used instead of Betektect Coating products or with these products.